Mazworx Products

This hydraulic release bearing kit is used to help aid in clutch engagement, relieve heavy pedal pressure with use of any heavy pressure plate related clutches including twin/triple discs. This also eliminates the factory slave and fork setup. We use the best hydraulic release bearing on the market, Tilton, and the highest grade of lines and fittings. Fits all 7-1/4" clutches and Exedy Multi-Disc clutches.

From high power tuned drag race to street usage, the EXEDY multi plate is capable of handling a variety of motor sport applications. Cerametallic Friction Material SD TypeThis model has been developed for high powered street cars and race cars with up to approximately 600TQ @ FW. They feature ventilated, thick intermediate plates for improved life and spring damper discs to protect your transmission and drive line.

Stock OEM differential rubber bushings wear out over time. These solid differential bushings helps reduce stress to the driveshaft and axles.

It is common for the rear subframe to crack during hard launches and aggressive driving. This plate reinforces the rear end of your vehicle. This plate is CNC cut. You will have to weld this on your subframe to strengthen it up.

Price is per injector. Select your size. The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to...

Our top feed fuel rail essentially works with only our SR intake manifolds. However with some custom work, you can make them work in any application. If you are using this fuel rail on a Greddy or equivalent manifold, you will need to weld on the brackets for it to work properly.  Accepts 14mm injectors.

Racing experience has shown that the stock iron block usually only last up to 2000hp. It then splits vertically along the head studs. We have also seen the main caps get loose. To resolve this, we designed this billet block. This block is completely made in house at Mazworx. It features the following: - Made from 6061-T6 Aluminum - OEM Deck Height - Uses 1/2"-9/16" Head Studs and 1/2" Main Studs with 3/8" Cross Bolts in center 5. - Tunnel will clear a 94mm stroke with aluminum rods -...

This valvetrain kit is for the P11 SR20VE heads (1N5).  If you plan to upgrade your P12 (8H6) head, you much change the valves and valve guides. P12 head cams with 5.5mm valve stems.  We recommend converting to the 6mm valves when going turbo.Basic kit comes with Titanium Retainers and Dual Valve Springs. Choose your upgrades. For all motor applications, we recommend not going higher than 93lb springs.

This valvetrain kit is for the SR20DE/DET heads except the GTi-R. Basic kit comes with Titanium Retainers and Single Springs. Choose your upgrades. If you have hydraulic pivots, we recommend not going higher than 90lb springs. If upgrading your valve size, we recommend going with the 6mm stem exhaust valves. This will require replacing the valve guides.

This kit allows you to relocate your alternator to the other side of the motor. Mainly needed when using the dry sump kit. You will have to us as SR FWD alternator and put your RWD pulley on it.

Now made with Billet Collector.  Fabricated in house here @ Mazworx. Stainless steel piping and completely tig-welded. Comes standard with a Tial 44/MVR wastegate flange. This manifold will fit either the DET or DET w/VE head conversions on a RWD platform.  For VE heads, the manifold is slotted.  So you will have to lift up on the manifold before tightening the bolts to the head.  This ensures the port line up with the manifold.Fits Garrett G25-G35 and GTX30-GTX35 with...

Mazworx Turbo/Water line kit includes complete water/oil lines & fittings for top mount turbo setup. Includes o-ring oil drain flange. Lines are covered in heat wrap.  Designed to work with the Mazworx SS Series SR20DET/VE RWD or Artech SR20DET Top Mount Turbo Manifold with G25-G35 turbo.