Transmission Adapter Parts

Mazworx's SR-VQ Adapter Housing provides a custom fitted bellhousing for easy installation of a Z33 gearbox on an SR20 RWD application. The kit includes: - SRVQ Bell Housing and Hardware - Front Cover Gasket and Input Shaft Seal (already installed) SRVQ Bell Housing Only Installation Instructions ...

These driveshafts are replacement for our SRVG, KAVG, and CAVG transmission conversions.They are built to order and usually take 1-2 weeks to build.

Made from 1/2" 6061-T6 and sized at 24" x 24", this adapter plate gives you the correct pattern to mount a GM bell housing to your SR20 RWD block.  This plate also stands the engine straight up instead of it's normal lean to the exhaust side.  This is used in chassis drag cars.  You will have to trim the outside profile to match your chassis.  Comes with engine bolts.

For doing Z33 transmission conversions, this bracket is shorter than OEM. Striker rod will need to be shorten to fit. as shown (not included). Reverse lockout plate optional.The shifter center is 5-3/8" from the mounting holes.

This crossmember is the one we include in our adapter kits for the S-chassis. If you are swapping in another motor with a Z32 trans and need a crossmember, here it is. Will not work with our RB to S-Chassis kit.

In order to put the Z32 trans in another car besides a Z32 chassis, you need this bracket to bolt the shifter on the trans.

This is just the CA to VG transmission adapter. Hardware includes bolts for the adapter plate to the block and transmission to the plate. Does not include all the other components. Bellhousing machining can be added to this. You will need to send us the bellhousing for machining or contact us for a whole trans.

This is just the KA to VG transmission adapter. Hardware includes bolts for the adapter plate to the block and transmission to the plate. Does not include all the other components. Bellhousing machining can be added to this. You will need to send us the bellhousing for machining or contact us for a whole trans.

This is just the SR to VG transmission adapter. Hardware includes bolts for the adapter plate to the block and transmission to the plate. Does not include all the other components. Bellhousing machining can be added to this. You will need to send us the bellhousing for machining or contact us for a whole trans.

These mounts are needed when converting to a B15 QR 6 speed transmission.

For B13/B14 chassis when converting to the Spec-V 6spd transmission. Select the type of block you have. The DE/VE style suits FWD blocks.The DET style suits AWD blocks.