Mazworx Products

These studs are for N/A applications for the VE and DE. For use without the girdle. Instructions

82mm DBW throttle body with a "drilled" option that works with Mazworx intake manifolds, weld flanges, and throttle body adapter kits. 

Billet aluminum flange to bolt a Bosch DBW 82mm throttle body to a 4" tube.  This flange is made with M7x1 threads (instead of the M6x1 threads normally) and will require you to slightly drill out the bolt holes in your throttle body for the larger bolts.  This larger bolt ensures the throttle body is secure under boosted applications. We offer the correct bolts which are custom made in house out of Stainless Steel as an option.Oring is included.

This throttle body adapter is used to mate a 3" Vibrant HD clamp to a Bosch 82mm throttle body using M7x1 hardware. A great addition to your Mazworx intake manifold or custom project. (options for pre drilled throttle body and M7 throttle body flange)   Designed to fit this style Bosch throttle body.Bosch 82mm DBW TB ...

Oring kit for our legacy VVL Solenoid Relocation Blocks

Motec Hall Sensor used for the cam trigger on our SR20RWD 60-2 and SR20FWD 36-2 kits.Documentation

Motec Magnetic Sensor used for the crank trigger on our SR20RWD 60-2 and SR20FWD 36-2 kits.Documentation

Bolt kit for our SRVQ to mount to the engine block

Made it house out of 4140 Heat Treated Chrome Moly with a Black Zinc coating.  The classic crank pulley bolt has a separate washer.  The P12 SR20VE started  coming as a bolt with integrated washer.  So we developed ours off the integrated as a flanged bolt. (torque to 140ftlbs.)   ...

BC Made In Japan Head Gaskets - Nissan VQ37VHR - 98mm Bore

If you want the highest level of timing accuracy, a 60-2 crank trigger gives that to you. Completely relying on the cam for timing introduces error. We developed this kit from the race team because we needed the most precise timing when making 2000+hp. The location we select to cut the teeth on the FWD pulley has a small diameter.  So the next best option is a 36-2 pattern.  This is still far superior compared to the CAS on the exhaust cam and still give very good resolution. This...

These fit all SR20 heads.  Configuration refers to the stem diameter of the valve.  All SR20 heads minus the SR20VE 8H6 use 6mm.  If using an SR20VE 8H6 head with OEM valves or aftermarket 5.5mm valves, select 5.5mm. Sold as each. Supertech Valve Guides are precision-machined from high quality Manganese Bronze material. Supertech Valve Guides are designed to be used in combination with Supertech low friction black nitrided valves to provide the best solution for both...