Shop Online

These rings are used with our VQ adaper bell housings.  Our bell housings are machine to fit the VQ35DE transmission input shaft bearing.  As the transmissions became newer models, the input shaft bearing became smaller.  So we make these rings so our bell housings will work with the new transmissions too.  If you are not sure which trans you have, you can measure the input shaft bearing.  Here's some sizes: Car              ...

Necessary tools to install our SR20 OIl Squirter. Comes with:DrillTap, M7x1

Labor:Hot Tank/CleanSand Blast/Paint Block, IronPort Center Coolant PassageMachine for Threaded Oil Port PlugsMachine for Threaded Freeze PlugResurface Block, VResize Cylinder w/ Torque PlateResize Line BoreClean, Check, Polish, and Balance Crank w/ BobweightsAssemble Short Block Parts:CP Pistons, 87.5mm 8.5:1 CR, Upgraded Wrist Pins 9310, .200" WallCarrillo Pro-H Beam Rods, CARRACL Race BearingsMazworx Threaded/Oringed Small PlugsMazworx Threaded/Oringed Freeze Plug KitMazworx Billet Main...

Complete bottom mount turbo kit for the SR20 RWD.  Will work on both DET and VE heads.  Gives that nostalgic bottom mount look with updated hardware.  Designed for power up to 550whp with great response.  This kit utilized the Garrett G25 turbo with internal wastegate.  Boost is controlled by the external actuator. Bottom mount equal length turbo manifold for the Garrett G25-550/660 internal wastegate. Fabricated in house here @ Mazworx. 1-1/4" Stainless steel piping,...

Nismo Oil CapFits many applications.M33x3.5 Thread

Bolt kit for our SRVQ to mount to the engine block

SR20DET Intake VTC Cam Gear for the S14/S15 engine.

Our Stage 2 engine package is designed for engines making 600-800 hp. ***Stage 2 Short Block***Labor:Disassemble Short BlockHot Tank/CleanSand Blast/Paint Block, IronMachine for Threaded Oil Port PlugsMachine for Threaded Freeze PlugResurface Block, InlineResize Cylinder w/ Torque PlateHone Line BoreInstall Oil Pump Collar on Crank (If needed)Clean, Check, Polish, Balance CrankAssemble Short BlockParts:CP Pistons, 86.5mm x 9:1 CRUpgraded Wrist Pins 9310, .250" WallManley Turbo Tuff RodsACL...

OEM dipstick tube for an SR20DET RWD

OEM dipstick for an SR20DET RWD.

The Competition Clutch twin disc provides the most economical racing clutch for the active sport compact enthusiast. This ceramic twin disc comes with a 4140 forged steel flywheel and a 6061 T6-aluminum cover complimented with a 6150 steel diaphragm.Specifically designed to fit our FAVQ bell housing adapterGeneric picture used.  Not actual product.

This hydraulic release bearing kit is used to help aid in clutch engagement, relieve heavy pedal pressure with use of any heavy pressure plate related clutches including twin/triple discs. This also eliminates the factory slave and fork setup. We use the best hydraulic release bearing on the market, Tilton, and the highest grade of lines and fittings. Fits all 7-1/4" clutches and Exedy Multi-Disc clutches Designed to work on our FAVQ Bell Housing.*picture shows the SRVQ kit.  FAVQ...