Intake Manifolds

These 60mm Individual Throttle Bodies fit the SR20VE P11 head. ITBs are at an angle to straighten flow into the runner. Manifold port is larger than stock and is designed to fit our Stage 3NA CNC port. They measure 6" from venturi to intake flange. Comes completely assembled with all 4 ITBs, billet runners, TPS, fuel rail, and throttle linkage with cable. Does not come with injectors. Runners have bosses pre-drilled on bottom to accommodate either nitrous nozzles or for vacuum ports. ...

The Mazworx S13 SR20DET Intake Manifold not only keeps the low end torque of the OEM manifold, but also carries the torque and horsepower through the RPM range.  This back-to-back testing was done on Kelsey Rowlings old SR20DET drift setup with a GTX3071R @ 17psi.  The green lines are the OEM intake while the purple lines are the Mazworx intake. Comes with a billet one piece runner section.  This manifold comes with 4 injector pockets and a single fuel rail.  Pick your...

Our latest version. Comes with a billet one piece runner section.Both P11 and P12 manifolds come standard with 4 injector pockets. 8 injector pockets only available on the P11 version due to the sliim injector port of the P12. Fuel rails are -10an.Pick your throttle body flange. Only comes with VE IACV.Standard manifold comes with a P11 flange. Optional P12 flange available.Nitrous nozzle bungs pre-marked on bottom of runners.Fits both RHD and LHD configurations.Fits 14mm x 60mm...

Set up to run 3 injectors per cylinder. Equal length runners and large plenum for optimum air flow. 90mm throttle body inlet and also includes Vacuum port provisions. Also includes 2 Mazworx top feed fuel rail -10an in/out and the installation hardware.Fits 14mm x 60mm injectors. Overall size 17.5" L - 10" W

Our latest version. Comes with a billet one piece runner section. Standard manifold comes with 4 injector pockets and a single fuel rail. Secondary injector bungs are there with no holes. You can upgrade now or later to 8 injectors and a secondary fuel rail. Fuel rails are -10an. Pick your throttle body flange and IACV flange.Standard manifold comes with a P11 flange. Optional P12 flange available.Nitrous nozzle bungs pre-marked on bottom of runners. A must have for those that are doing the VE...

The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Greddy Intake manifold is a must.OEM throttle body.

The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Greddy Intake manifold is a must.Fits OEM throttle body.